Pengantar pengoperasian peralatan pendukung lantai
The operation of the floor support equipment is briefly introduced. Pengoperasian peralatan pendukung lantai diperkenalkan secara singkat. The floor support equipment must first install the following steel beams and then lay the floor support plate on the steel beam. Peralatan penopang lantai pertama-tama harus memasang balok baja berikut dan kemudian meletakkan pelat penopang lantai pada balok baja. The contact between the floor support plate and the steel beam is generally anchored with anchors. Kontak antara pelat penyangga lantai dan balok baja umumnya berlabuh dengan jangkar. As for welding: floor support The slab laying is connected with the steel beam, the end of the slab is penetrated by spot welding with the steel beam, the pierce and the steel beam are penetrated and welded in the middle, and the special clamping pliers are used to connect the floor between the floor plates. Adapun pengelasan: penyangga lantai Peletakan pelat dihubungkan dengan balok baja, ujung pelat ditembus oleh pengelasan spot dengan balok baja, tusuk dan balok baja ditembus dan dilas di tengah, dan tang penjepit khusus digunakan untuk menghubungkan lantai antara pelat lantai.
The floor support board equipment must first install the following steel beams, and then lay the floor support board on the steel beam, and the contact part between the floor support board and the steel beam is generally anchored with anchors. Peralatan papan penopang lantai pertama-tama harus memasang balok baja berikut, dan kemudian meletakkan papan penopang lantai pada balok baja, dan bagian kontak antara papan penopang lantai dan balok baja umumnya berlabuh dengan jangkar. As for welding: the floor support board is laid and connected with the steel beam, and the board end The penetration welding of the head and the steel beam, and the penetration welding of the peg and the steel beam in the middle, Adapun pengelasan: papan dukungan lantai diletakkan dan terhubung dengan balok baja, dan ujung papan Pengelasan penetrasi kepala dan balok baja, dan pengelasan penetrasi pasak dan balok baja di tengah,
The floor slabs are connected with special clamping pliers to engage the pressure holes, and the plugs are spot welded to the floor slabs and steel beams with special galvanized plugs. Pelat lantai dihubungkan dengan tang penjepit khusus untuk menyambung lubang tekanan, dan sumbat dilas di tempat ke pelat lantai dan balok baja dengan sumbat galvanis khusus. If it is an arc-shaped area, the special shape cutting of the floor slabs is cut by a plasma cutting machine , The incision is smooth, and the surface galvanized layer is complete. Jika itu adalah area berbentuk busur, pemotongan bentuk khusus dari pelat lantai dipotong oleh mesin pemotong plasma, sayatan halus, dan lapisan permukaan galvanis selesai.
Kontak Person: Mr. Arno Hao
Tel: +8618717894416